IT-M3400 bidirectional DC power supply integrates the features of a bidirectional dc power supply and a regenerativeelectronic load. It keeps the advantages of high power density and modular architecture design of M series. It can meet the customer's test requirement of different current and power level. Thanks to the independent multi-channel design, users can configure each channel according to the quantity and specifications of the DUT. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing, suitable for multiple test fields, such as power modules, intelligent industrial equipment, automotive electronics, charging and discharging tests of various small capacity batteries.
- 1U Half-rack, high power density
- Bidirectional energy flow
- High efficient power regeneration
- Battery test
- Battery simulation
- Independent control of multi-channels with functions of synchronization and proportional tracking
- Up to 16 units can be paralleled connected
- High speed measurement, 10 times/S updating rate
- CC/CV priority
- Adjustable output impedance
- Programmable voltage and current rise and fall time
- Temperature measurement function, over temperature protection
- List programming
- Various protection such as OCP / UCP / OVP / OTP / OPP / UVP, over heat protection, grid fault protection and fault storage, foldback, Power-off protection, sense abnormal protection
- Automatic detection of power grid state to realize reliable grid connection
- Pre charge function to prevent overshoot of DC loading current
- Anti-reverse protection function through optional accessories
- Five optional cards, supporting RS232, CAN, LAN, GPIB, USB_TMC, USB_VCP, RS485, analog and IO communication
Low-power power module test
DC-DC power module, micro-inverter, DC-AC power module, bidirectional DC-DC module
Intelligent industrial equipment test
UAV ESC, small robot servo motor
Various small capacity battery charge and discharge test
Electric vehicle battery, 3C product battery, UAV battery
Automotive electronic equipment power supply test
Electric power steering motor, electric brake ibooster
1U Half Rack Mini Size
IT-M3400 is only 1U half-rack, but the power output is up to 800W. Besides high power density, it also has high resolution, high accuracy and high stability, etc. The output voltage is up to 600V and the output current is up to 30A. All series containing 12 models with ultra-wide range output design, can be widely used in various applications.
Seamless Switching Between Source and Sink
Traditional power supply and load have short transitions and inconsistencies in the middle of positive and negative current switching. The IT-M3400 integrates bidirectional power supply and regenerative e-load in one, which is capable of achieving high-speed and seamless switching between source and sink. A fast and seamless transfer between source and sink effectively avoids voltage or current overshoot. The IT-M3400 is widely used in batteries, battery packaging, battery protection boards and other energy storage equipment testing.
CC & CV Priority
IT-M3400 continues to support CC / CV priority function, help customers solve a variety of severe problems in long-term testing. For test that require high-speed voltage, users can select the CV priority mode to obtain a faster voltage climb speed; or choose CC priority mode, output current without overshoot, used to test DUT with constant current operating characteristics. This function is widely used in power supply transient simulation and characterization test applications, such as lasers, integrated circuits, charge and discharge, automotive electronics.
Modular Design, Flexible Combination
The flexible modular design makes it simple for IT-M3400 to stack directly, no need to purchase any accessories. The user may use IT-E154 optional rack mount kit to install one unit or more units into 19” rack case.
Multi-Channel Independent Control, Maximum 256 Channels
IT-M3400 provides flexible multi-channel function, the users can build-up multi-channel source-sink system, each unit will show the channel number on the front panel. PC only need to connect with one unit to control and program all the units independently by GUI software. IT-M3400 support maximum 16*16 channels, each 37U rack can integrate 64 units which is 64 channels. It supports parallel connection for high power testing demands, to provide high flexibility and functionality for users.
High Energy Regeneration Efficiency
IT-M3400 series is regenerative when working in sink under source mode, also regenerative working under load mode. The max regeneration efficiency is up to 90%, which can save the cost for both electricity and cooling system, achieving low noise testing environment.
~6307 kWh can be deducted from your electricity and cooling bill using 1pc IT-M3400 (800W) for 1 year.
Battery Simulation Function
battery matrix. The user can set the battery by choosing ITECH optional professional BSS2000 battery simulation software, by setting common battery parameters to quickly establish the battery characteristic curve, they can also set the initial capacity of the battery, to verify the characteristics of the product in different states of the battery. At the same time, BSS2000 supports user to import MATLAB battery matrix or import the actual battery charge and discharge curve through .CSV file, to simulate real battery's charge and discharge characteristics.
Optional BSS2000 Battery Simulation Software
Battery Test Functions
IT-M3400 series Regenerative Power System, which integrates power supply and regenerative electronic load into one unit, and adjustable output impedance design, can simulate the charging and discharging characteristics of the battery, and perform other testing, too. It can be used not only test the multiple single cells, but also comprehensive test the battery packages. It can also perform the battery setting and data processing in various test conditions and plot the test figure.
Optional ITS5300 Professional Battery Test Software can perform the following tests:
Working condition simulation, Battery DC IR test, Battery endurance test, Battery temperature test, Reliability test, Charge and discharge characteristic, Battery cycle life test, Battery capacity test, Over-charge and over-discharge endurance test, Battery conformity test.
IT-M3400 rear panel provides interface expansion slot for users to expand. Different interfaces can be selected to realize different functions, such as communication interface, external analog interface, temperature sensor, etc.
|IT-E1208||External analog/RS485 interface|
|IT-E118||Anti-reverse connection module|
|IT-E154A/B/C||Rack mount kit|