IT6860A series (72~180W) programming DC power supply offers dual-range voltage switch for your choice, which can replace two ordinary ones, greatly saving your cost and operation space. At the same time, IT6860A supports panel List programming and software operation via computer to meet more communication demands. IT6860A series is suited for laboratory testing, online production test, maintenance testing, etc.
- Dual range output
- Convenient data entry via knob or numerical key pad
- High accuracy and high resolution
- Remote sense
- Output voltage and current values accordance with procedure
- Adjust voltage and current via Knob
- Low ripple and low noise
- OVP, OTP
- Built-in RS232/USB/GPIB interface *1
- Monitor software via PC
- Support three devices connection through System Bus to achieve three-phase AC power function
- *1 Only IT6800B dual range series have built-in GPIB communication interface
IT6860A series (72~108W) power supplies are programmable dual-range output power supplies. Voltage 8V~150V, current 1.5A~9A. With high resolution of 1mV, 0.1mA, which can test the products with different power range. You can adjust the voltage/current stepping by pressing the left and right keys to moving the cursor. It supports output timer function and programs by the front panel, which will bring great convenience. Their built-in RS232 and USB communication interfaces make the communication much faster. Each power supply has 2 voltage output ranges and 2 current output ranges, one set of IT6860A can work as two sets of the traditional supplies. Greatly saving your cost and operation space.
IT6800A series power supplies give you the flexibility to select from dual output ranges. Normally, if user purchase a 32V/3A/96W power supply, the current working range is limited to 3A. But for IT6862A, user could get a high current working limitation by switch the working range. This feature greatly saves customer’s cost.
Output Timer Function
IT6860 series power supplies support output timer function. When you enable the function, the “Timer” indicator will lit on the VFD. When the output is “on”, the output will turn off automatically after the time elapsed.
List mode allows user to create a sequence of steps, store it into the power supply’s non volatile memory and execute it. The input parameters for generating a list include the name of the list file, the input steps (no more than 150 steps), the step time (the minimum is 100mS) and the value of each step.